Make sure that phantom power in enabled if required by the mic. A "half unbalanced" connection or balancing transformer is suggested for driving long lines. Select Pink Noise as the source under Generator. The output level control Speaker icon on the Windows task bar can be used to set the noise level to properly drive the system being tested. The headphone output is not being used in this configuration.
|Date Added:||22 October 2012|
|File Size:||29.24 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Used together, the USBPre and Smaart allow the transfer function of a system or device to be measured. Use the input level control to adjust the incoming signal to 12 dB and run the Smaart Delay Locator to adjust for the time offset between the channels.
A "half unbalanced" connection or balancing transformer is suggested for driving long lines. This can be siia with an unbalanced connection for short cable runs. As Rational Acoustics, we ska a small, independent company focused siia on Smaart, which means we can make decisions that make sense for our software and our market. The output level control Speaker icon on the Windows task bar can be used to set the noise level to properly drive the system livee tested.
From the outset, the Smaart v7 code base was optimized to make use of the all power that modern processor configurations present, whether it be from one processor or eight.
In addition, we can focus full-time on providing the high level of support and development that have been the hallmark of the Smaart platform. Have something to say about this PSW content?
The changes to Smaart extend far beyond the application itself. Your email address will not be published.
An Introduction To The New Smaart Version 7 Test & Measurement Platform
Smaart v7 test and measurement software is a completely new code base developed from the ground up. The USBPre now lives in my computer bag, providing the ability to perform high resolution transfer function measurements on demand. This allows the transfer function of the equalizer to be measured if desired.
You can now perform transfer function measurements in Smaart in the usual manner. Sound Devices thanks Pat Brown for providing siq information to our test and measurement customers. Make sure that phantom power in enabled if required by the mic. The front panel controls on the USBPre can be used to trim each input level to 12 dB on the USBPre's input level meter, a value that should provide adequate headroom for the signal. While several connection methods are possible, the one that I typically dmaart to is as follows: The USBPre provides the important functions of the external mixer in an extremely compact, high performance package.
Save my name, email, and website in this browser for the next time I comment.
As you can see in the screen capture at left, v7 can run multiple, simultaneous Spectrum and Transfer Function measurements. This provides smarat reference signal that Smaart will calculate the transfer function against. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.
Make certain that the proper inputs are selected on the front livve the USBPre. The headphone output is not being used in this configuration.
Sound Devices - USBPre with SIA Smaart Software
Submit a Sales or Support Inquiry. Launch the Smaart software application and make certain that the USBPre is selected for both recording and playback under Devices. A properly wired twisted-pair shielded cable should be used along with a TRS plug to maintain an electrically balanced connection.
One of the most exciting new features of Smaart v7 is our company, Rational Acoustics, which is made up of the same people who have been developing and steering Smaart for the last 12 years as SIA Software Livw within EAW.
Select Pink Noise as the source under Generator. Multi-Channel, Multi-Platform Smaart v7 is inherently multi-channel and multi-platform, able to smaaart modern multi-channel input soa and operate native in both Windows and Mac operating systems including and bit versions.
Important benefits include balanced inputs, phantom power, analog level controls, meters, bus-powering to eliminate batteries and "wall warts," and of course high-quality audio inputs. Smaart v7 System Hardware, Recommended Configuration: The Mix control should be set fully clockwise PC position.